Innosilicon T2T-29T BTC Miner with the high tube and 4-fan frame design will continue to deliver reliable performance for efficient and profitable mining going forward.
- Hashrate:29Th/s (+/-5%)
- Power Consumption:2200W ( +/- 10%, normal mode, on wall, PSU efficiency: 93%, temperature: 25°C)
- Dimensions:266mm(L)*203mm(W)*278mm(H),dual tube
- Net Weight:8.1KG
- Allowed ambient temperature range:0°C to 40°C
- Network Connection:Ethernet
Please make sure your farm uses proper cooling, dust filter, and 10A AC cable to meet the proper operating condition requirements. Humidity <75%, AC voltage 210~240V, Power supply AC input current 10A, dust <0.5 Mg/m3.
Shipping & Packaging
1. Delivery time: Shipment will be arranged in 5 business days after full payment confirmation. First pay, first serve.
Notice: Due to the coronavirus disease, logistics and transportation are affected to some extent. Delivery will be arranged based on the actual situation and shall be subjected to our official website.
2. Please be aware: T2T-29T PSU is inclusive, and the PSU we provide is specially customized for our miners. Since customers require different types of plugs, the PSU does not contain 220V AC cables. You can order the standard IEC C14 AC power cable to use with the PSU.
3. T2T-29T PSU is more than 2000W, so please purchase AC cable with 3*1.5mm specifications, and 3 wire cores with a diameter no less than 1.5mm.
4. Please write down the recipient’s name, contact information, and address carefully. Shipping address cannot be changed once the order is submitted. We will ship according to the information given to us. You will be responsible for any damages or losses caused by errors in the information.
5. We guarantee the safety of the goods until they are in the hands of the shipping carrier. Once the shipping carrier has accepted the goods, the ownership of them will be transferred to customers. Any damage or losses of the goods during transport and import customs clearance will be charged to the buyers.
6. To ensure the security of high-value miners in transit, we have been implementing shipping insurance since December 26th, 2017. We will use the company name (if not available, then the name of the buyer) as the insured party. Please make sure that the information is correct.
All Innosilicon T2T-29T will be tested by the factory before shipment and certified by Innosilicon. The post-sales service policy is as follows. After payment, your order will be processed immediately.
180 days parts warranty for any miners directly purchased from Innosilicon (counting upon miner arrival). If any problem, please leave an after-sales message on our message board. Our technical support team will get in touch with you ASAP.
Please don’t send any machines or parts without contacting the technical support team first. Any loss or damage as a result of lack of contact will be the responsibility of the customer.
The price of miners may be adjusted at any time without prior notice or price compensation to customers.
The warranty expires in the following cases:
- Miner is demolished, privately altered or component replaced by customers;
- Damage caused by lightning, voltage surges, and poor-quality power supply.
- Circuit boards and components damaged by water, exposed to moisture or corroded;
- The circuit board or the chip is completely burned;
- Excessive overclocking in an overheating environment;
If one of the cases above happens, you shall be charged for your miner maintenance services. For the specific procedures, please refer to the after-sales process.
Notes: Please ensure your miners are taken care of in a proper farm with cooling and dust filter conditions. Warranty expires if you overclock miners or run them at excessive heat or dusty conditions beyond our target range.
There are no reviews yet.